IVC-0101

IVC-0101
1 10/100TX to VDSL2 Industrial Converter

UL Class I Division II for Group A,B,C and D hazardous location
Compliant with ITU-T G.993.1(VDSL) and G997.1
CO / CPE selectable via DIP Switch
Wide Operating Temperature (-40 ~ 75°C)

OVERVIEW

The Lantech IVC-0101 is an industrial Ethernet extender via VDSL (phone-line) with wide operating temperature. IVC-0101 complaints with ITU-T G.993.1 (VDSL) and G997.1. It provides a cost-effect VDSL2 bridge solution for CO/CPE selectable via DIP switch and supports VDSL connection up to 2KM.
The Lantech IVC-0101 is designed to meet the demands of industrial environments, comes packaged in a robust IP 30 housing and has been tested extensively to meet Industrial EMI and EMC standards. With UL508 and UL Class I Division II approval, IVC-0101 can be implemented in hazardous or explosive condition without accelerating the potential damage. It is the best choice to be installed in inflammable environment where the liquid, gas and vapor etc might present the hazardous condition which generally to be find in mining, oil & gas, chemical, processing automation areas.

Certificados

Caracteristicas
Especificações
Part Number
Downloads

FEATURES

Compliant with ITU-T G.993.1(VDSL) and G997.1

TX port support Auto MDI/MDI-X

Cost-effect VDSL2 bridge solution

CO / CPE selectable via DIP Switch

4 DIP Switches for Configuration Settings

Support VDSL Connection up to 2KM

Wide Operating Temperature (-40 ~ 75°C)

UL508/ UL Class I Division II for Group A,B,C and D hazardous location

High Performance

Full VDSL2 bandwidth up to: (Down Stream / Up Stream)
- 200m -> 88 / 49Mbps
- 400m -> 63 / 29Mbps
- 600m -> 46 / 18Mbps
- 800m -> 30 / 5.7Mbps
- 1000m -> 22 / 5.3Mbps
- 1500m -> 18 / 0.8Mbps
- 2000m -> 9 / 0.5Mbps

Hardware Specification
Connector	10/100TX : RJ-45 x 1 VDSL : RJ-45 x 1 with Female Phone Jack
DIP Switch	DIP 1: Master, Slave Switch OFF: Acting as Central Office (CO) side ON: Acting as Customer Premise Equipment (CPE) side DIP 2: Impulse noise Protection OFF: Interleave mode ON: Fast mode DIP 3: Rate Limit control OFF: Limit line-rate Enable ON: Limit line-rate Disable DIP 4: General Protection OFF: SNR 9dB ON: SNR 6dB.
LED	Per unit: Power1(Green): ON: Power 1 on/ OFF: Power 1 off/ BLK:-- Power2(Green): ON: Power 2 on/ OFF: Power 2 off/ BLK:-- P-Fail(Red): ON: Power1/Power2 is inactive/ OFF: Power1 and Power2 are both active, or no power input/ BLK:-- 10/100TX: LNK/ACT(Green): ON: Link up/ OFF: Link down/ BLK: Transmitting SPD(Amber): ON:100Mbps/ OFF:10Mbps/ BLK:-- VDSL: LNK/ACT(Green): ON: Link up/ OFF: Link down/ BLK: Negotiating, Transmitting CO(Green): ON: Acting as Central Office (CO) side/ OFF: Acting as Customer Premise Equipment (CPE) side/ BLK:--
Power Supply	AC 24V DC 12~48V/DC -12~-48V, Redundant power with polarity reverse protect function and removable terminal block
Reserve polarity protection	Present
Relay Alarm	1A @ DC24V
Power Consumption	4.8 Watts( 48VDC)/ 7.7 Watts( 24VAC)
MTBF	260,895 hrs
Operating Humidity	5%~95% (Non-condensing)
Operating Temperature	-40°C~75°C
Storage Temperature	-40°C ~85°C
Case Dimension	Metal case. IP-30, 30 x 140 x 95 mm
Installation	DIN Rail and Wall Mount Design
EMC	CE, FCC Class A EN61000-6-4 EN61000-6-2 EN61000-4-2 (ESD) EN61000-4-3 (Radiated RFI) EN61000-4-4 (Burst) EN61000-4-5 (Surge) EN61000-4-6 (Induced RFI) EN61000-4-8 (Magnetic Field) EN61000-4-11 (Voltage Dip) EN61000-3-2 (Harmonics Current) EN61000-3-3 (Voltage Fluctuation & Flickers)
Safety	UL508, Class 1/ Division 2
Shock	IEC60068-2-27
Freefall	IEC60068-2-32
Vibration	IEC60068-2-6
Warranty	1 year

ORDERING INFOMATION

IVC-0101………………………………P/N: 8350-030
1 10/100TX to VDSL2 Industrial Converter;
Wide Operating Temp. (-40°C~75°C)

OPTIONAL ACCESSORIES

DIN Rail Power

AD1048-24FS
24VDC, 2A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 18 Watts at 75°C.)
AD1024-24F
24VDC, 1A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 9 Watts at 75°C.)
AD1240-48S
48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
AD1120-48F
48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)

d-ivc-0101.pdf	Link para download
m-ivc-01012.pdf	Link para download