+55 (11) 3488-8787
Clique e conheça a página da Softbrasil no Facebook Clique e conheça nosso perfil no Twitter Acesse nosso Canal no Youtube Faça parte de nossa Rede no Linkedin



8 10/100TX + 2 1000FX M12 / IP-67 Managed Industrial Switch w/8 PoE Injectors

  • Pro-Ring II : Pro-Ring II 10ms, Advanced Dual Homing, Daisy Couple Ring and Multi Couple Ring Topology
  • Provides M12 connector with IP-67 protection
  • Wide Operating Temperature from -40°C to 75°C
  • Complies with IEEE 802.3af PoE Standard


    Lantech IPES-2208GF-67 is a 8 10/100 Base-TX + 2 1000FX Managed Industrial Switch with 8 PoE injectors. The full SNMP management features are including QoS for 4 queues, 801.q VLAN, IGMP snooping and query mode as well as SNTP and SMTP.

    Equipped with DC 48V redundant input power, Lantech IPES-2208GF-67 is able to feed each PoE port up to 15.4Watts with IEEE 802.3af PoE standard. It also supports relay contact to connect with alarm system, which can immediately notify of power failure and/or port down events. In case of events, Lantech IPES-2208GF-67 will immediately send an email to pre-defined addresses and send trap to stations.

    Lantech IPES-2208GF-67 supports supports Pro-Ring (Legacy-Ring) and Pro-Ring II system. Pro-Ring (Legacy-Ring), an auto-recovery path within 10ms up to 250 Lantech Industrial Switches; Pro-Ring II is a new Ring mechanism for Lantech Industrial Switches in which it eliminates the need to pre-set the Master switch in previous Pro-Ring and yet to protect the network by much secure topologies than ever. It works as a Ring Chain to reduce the risk of master switch linking down whereas the setup becomes much easier. Pro-Ring II can be backward compatible with old Pro-Ring by down-grading the Ring scheme to old one.

    IPES-2208GF-67 is designed to meet with critical network environment with IP67 enclosure and M12 connectors for protection against immersion in water. It passed several tests under extensive Industrial EMI and Safety standards. It also passed stability testing such as Free fall, Shock, and Vibration. For more usage flexibilities, IPES-2208GF-67 supports wide operating temperature from -40°C to 75°C.

    Lantech IPES-2208GF-67 is the best to be used in any critical industrial environment where needs PoE functionality.


 8-port 10/100TX + 2-port 1000FX Managed Industrial Switch with 8 PoE injectors

 Back-plane (Switching Fabric): 5.6Gbps

 1Mbits Packet Buffer

 8K MAC address table

 IP-67 protection with M12 connectors

 Redundant Power Design

 IP v6 Management

 IEEE 802.1d Spanning Tree & IEEE 802.1w RSTP

 Port Based VLAN, 802.1Q Tag VLAN, GVRP


  • Pro-Ring , Dual Homing, and Couple Ring Topology.
  • Provide redundant backup feature and the recovery time below 10ms.

 Port Trunk with LACP

 Supports IEEE 802.1ab LLDP

 IEEE 802.1p Class of Service, per port 4 priority queues

 Port base, Tag Base and Type of Service Priority

 Supports Ingress Packet Filter and Egress Rate Limit

 Supports Broadcast/Multicast Packet Filter Control

 Port Mirror: Monitor traffic in switched networks

 System Log Server/Client

 Supports SSL to protect the data access from WEB browser

 Supports SSH Security Shell for telnet


  • Port Security: MAC address entries/Filter
  • IP Security: IP address security management to prevent unauthorized intruder
  • Login Security: IEEE802.1X/RADIUS

 SNMP Trap

  • Device cold start, Power status, Authentication failure, Pro-Ring topology changed, Port Link up/Link down, PoE port events

 Relay Alarm Output System Events

 IGMP with Query mode for Multi Media Application

 TFTP Firmware Update and System Configure Restore/Backup

Hardware Specification

IEEE Standard

IEEE802.3 10Base-T Ethernet 
IEEE802.3u 100Base-TX 
IEEE802.3z Gigabit fiber 
IEEE802.3x Flow Control and Back Pressure 
IEEE802.3ad Port trunk with LACP 
IEEE802.3af Power over Ethernet
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree 
IEEE802.1p Class of Service 
IEEE802.1Q VLAN Tag 
IEEE802.1x User Authentication (Radius)
IEEE802.1ab LLDP

Switch Architecture

Back-plane (Switching Fabric): 5.6Gbps

Transfer Rate

14,880pps for Ethernet port 
148,800pps for Fast Ethernet port 
1,488,000pps for Gigabit Fiber Ethernet port

Packet Buffer


MAC Address

8K MAC address table


10/100TX: 8 x M12 4-pole D-coded with auto MDI/MDI-X function
2 1000FX/LC (LX/SX) connectors
RS-232 connector: 1 x M12 8-pole A-coded

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E, 6 cable
EIA/TIA-568 100-ohm (100m)

Optical Cable

Multi-mode: 50/125um~62.5/125um
Single mode: 9/125um
Available distance: 550m (Multi-mode)/10km (Single-mode)
Wavelength: Multi-mode:850nm, single-mode:1310nm




Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red), R-Master (Green)
Ethernet: Link/Activity (Green, Fiber: Link/Activity (Green)
PoE Power (Green) per port

Power Supply

DC 47 VDC ~ 58VDC, redundant power inputs via an M23 6-pole A-coded

Power Consumption


Operating Temperature

-40°C~75°C / -40°F~167°F

Storage Temperature

-40°C~85°C / -40°F~185°F

Operating Humidity

5% ~ 95% (Non-condensing)

Case Dimension

IP-67, 193mm (W) x 176mm (H) x 62.5mm (D)




Wall mount design


FCC Class A, CE EN61000-4-2 (ESD), 
CE EN61000-4-3 (RS), CE EN-61000-4-4 (EFT), 
CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), 
CE EN61000-4-8, CE EN61000-6-2,
CE EN61000-6-4

Stability Testing

IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)


UL508, UL, CE/EN60950-1
UL Class I Division II for Group A,B,C and D hazardous location

PoE pin Assignment

RJ-45 port # 1~# 8 support IEEE 802.3af End-point, Alternative A mode.  Per port provides 15.4W ability. Positive (VCC+): RJ-45 pin 1,2. Negative (VCC-): RJ-45 pin 3,6


320,420 hours


1 year

Software Specification


SNMP v1 v2c, v3/ Web/Telnet/CLI


RFC 1215 Trap, RFC1213 MIBII, RFC 1157 SNMP MIB, RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, RFC1643 , RFC 1757, RSTP MIB, LLDP MIB, Private MIB


Port-based VLAN, up to 256 groups
802.1Q Tag VLAN and Double Tag VLAN (Q-in-Q)
Static VLAN groups up to 256, VLAN ID from 1 to 4094
GVRP, up to 256 Groups

Port Trunk with LACP

LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk members


Supports IEEE802.1ab LLDP, the advertising of the switch’s Identity and capabilities

Spanning Tree

Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree


Supports Pro-Ring II, Advanced Dual Homing, Daisy Couple Ring and Multi-couple Ring Topology. Provides redundant backup feature and the recovery time below 10ms for a ring of up to 250 switches

Quality of Service

The quality of service determined by port, Tag and IPv4 Type of service, IPv4/IPv6 Different Service

Class of Service

Supports IEEE802.1p class of service, per port provides 4 priority queues

Port Security

Support 256 entries of MAC address for static MAC and another 256 for MAC filter


Support Secure Sockets Layer to protect the data access from WEB browser


Supports Security Shell for telnet

Port Mirror

Supports 3 mirroring types: "RX, TX and Both packet"


Supports IGMP snooping v1,v2 
256 multicast groups and IGMP query
Supports multicast filter up to 256 entries

IP Security

Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.

Login Security

Supports IEEE802.1X Authentication/RADIUS

Flow Control

Supports Flow Control for Full-duplex and Back Pressure for Half-duplex

System Log

Supports System log record and remote system log server


Supports SMTP Server and 6 e-mail accounts for receiving event alert


Supports SNTP to synchronize system clock in Internet

Bandwidth Control

Supports ingress packet filter and egress packet limit
The egress rate control supports all of packet types, and the limit rates are 0~128Mbps
Ingress filter packet type combination rules are:

  1. All
  2. Broadcast/Multicast/Flooded Unicast packets
  3. Broadcast/Multicast packets
  4. Broadcast packets only

The packet filter rate can be set from 0~128Mbps

Relay Alarm

Provides one relay output for port breakdown, power fail and alarm
Alarm Relay current carry ability: 1A @ DC24V


Up to 3 trap stations; trap types including:
1. Device cold start,
2. Authorization failure,
3. Pro-Ring topology changed.
4. Port link up/ link down.
5. MAC violation


Provides DHCP Client/ DHCP Server/ Port-IP Binding


Provides DNS client feature and support Primary and Secondary DNS server

Firmware Update

Supports TFTP firmware update, TFTP backup and restore.

Configuration upload and download

Supports binary format configuration file for system quick installation

Mac Violation

Support MAC violation that can help secure access to the physical network port


IPv4/IPv6 Dual Protocol stack,
IPv6 Address Types Stack: Multicast / Unicast,
IPv6 Neighbor Discovery, ICMPv6 Redirect (host),

  • IPES-2208GF-67-MM…………....….….......P/N: 8350-950 
    8 10/100TX + 2 1000FX (SX, MM, 0.5KM) IP67 Managed Industrial Switch w/ 8 PoE Injectors
  • IPES-2208GF-67-SM…………....….….......P/N: 8350-951 
    8 10/100TX + 2 1000FX (LX, SM, 10KM) IP67 Managed Industrial Switch w/ 8 PoE Injectors



DIN Rail Power

  • AD1240-48S
    48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C 
    (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
  • AD1120-48F
    48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
    (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)


M12 Connector / Cable

  • ECON120005MM
    5 Pin M12 Power Male Connector
  • ECON120004FF
    4 Pin M12 RJ45 Female Connector
  • ECON120003FF
    3 Pin M12 Relay Female Connector
  • ECAB125030F0
    5 Pin M12 Power Female 3M Cable
  • ECAB124030MJ
    4 Pin M12 RJ45 Male 3M Cable
  • ECAB123030M0
    3 Pin M12 Relay Male 3M Cable
  • ECAB124030MM
    4 Pin M12 Male-Male 3M Cable
d-ipes-2208gf-67.pdfLink para download