+55 (11) 3488-8787
Loading
Clique e conheça a página da Softbrasil no Facebook Clique e conheça nosso perfil no Twitter Acesse nosso Canal no Youtube Faça parte de nossa Rede no Linkedin

IPES-0008-4

IPES-0008-4

8 10/100TX with 4 PoE Injectors 24~48VDC Industrial Switch

  • Complies with IEEE802.3af PoE standard
  • Input 24V~48VDC redundant power design boosting to 48VDC output
  • Wide operating temperature range from -40°C to 75°C
  • UL Class I Division II for Group A,B,C and D hazardous location


    OVERVIEW

    The Lantech IPES-0008-4 is an unmanaged industrial switch supporting PoE (Power over Ethernet) function on port 1 to port 4, in which it complies with IEEE 802.3af and provide up to 15.4 watts power output per port. IPES-0008-4 supports IEEE802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-negotiation and provides a power fault relay warning function when power failures occur.

    The Lantech IPES-0008-4 is designed specially with tough environment where only 24VDC power is accessible by boosting input 24VDC to 48VDC output then feeding power through Ethernet cable to power devices (PD). 

    The Lantech IPES-0008-4 meets with critical network environment with IP 30 enclosure and test under extensive Industrial EMI and Safety standards. It also passed stability testing such as free fall, shock and vibration.

    The Lantech IPES-0008-4 is the best Industrial switch to connect with IP Camera, Wireless Equipments where are placed outdoor or in tight space cabinet with 24VDC power source. It can be used in extreme environments with an operating temperature range of -40°C to 75°C.

    UL Class I Division II safety certification makes IPES-0008-4 your best choice to be installed in inflammable environment where the liquid, gas, and vapor might present the hazardous condition which generally to be find in mining, oil & gas, chemical, processing automation areas.




Certificados

 Back-plane (Switching Fabric): 1.6Gbps

 Provides 10/100TX Ethernet Connection

 Provides 4-port PoE Output

 PoE Supports IEEE802.3af Standard

 Provides Fault Relay Output

 24/48VDC Redundant Power Input and 48VDC Output

 UL Class I Division II for Group A,B,C and D hazardous location

 Wide-range Operating Temperature: -40°C ~75°C

IEEE Standards

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet
IEEE802.3x Flow Control and Back Pressure
IEEE802.3af Power over Ethernet

Switch
Architecture

Back-plane: 1.6Gbps

Transfer Rate

14,880pps for Ethernet port
148,800pps for Fast Ethernet port

Connector

10/100TX: 8 x RJ-45 with auto MDI/MDI-X function
Power & P-Fail connector: 1 x 6-pole terminal block

PoE pin assignment

RJ-45 port # 1~# 4 support IEEE 802.3af End-Span, Alternative A mode. 
Per port provides 15.4W (MAX) which depends on the power consumption of the PD.
Positive (VCC+): RJ-45 pin 1, 2.
Negative (VCC-): RJ-45 pin 3, 6.
Data (1,2,3,6 )

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E, 6 cable
EIA/TIA-568 100-ohm (100m)

Protocol

CSMA/CD

Packet Buffer

56Kbytes

MAC Address

2K MAC address table

Case Dimension

IP-30, 48.6mm (W) x 140mm (H) x 95mm (D)

Installation

DIN Rail & Wall Mount Design

LED

Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red), PoE (Green)
Ethernet: Link/Activity (Green), Speed (Green)

Power Input

DC 24/48V, Redundant power input with polarity protection.

Power
Consumption

DC Input

DC 24V

DC 36V

DC 48V

Unload

A

0.08

0.06

0.05

W

1.92

2.16

2.4

Full load

A

2.67

1.73

1.15

W

64.08

62.28

61.44

 

Relay Output

1A @ 24VDC, P-Fail detection for power fail

Power Connector

6-pole terminal block x 1

PoE Power Output

15.4 Watts max. @ 48 VDC

Operating Humidity

5% to 95% (Non-condensing)

Operating Temperature

-40°C~75°C / -40°F~167°F

EMI &EMS

FCC Class A, 
CE EN61000-4-2 (ESD), 
CE EN61000-4-3 (RS), 
CE EN-61000-4-4 (EFT), 
CE EN61000-4-5 (Surge), 
CE EN61000-4-6 (CS), 
CE EN61000-4-8, 
CE EN61000-6-2,
CE EN61000-6-4

Safety

UL/cUL 508
UL Class I Division II for Group A,B,C and D hazardous location

Stability
Testing

IEC60068-2-32(Free fall), 
IEC60068-2-27(Shock),
IEC60068-2-6(Vibration)

MTBF

241413 hrs

Warranty

1 year
 


  • IPES-0008-4…..…………....….….......P/N: 8450-560
    8 10/100TX with 4 PoE Injectors 24~48VDC Industrial Switch

 

OPTIONAL ACCESSORIES

DIN Rail Power

  • AD1048-24FS
    24VDC, 2A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
    (ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 18 Watts at 75°C.)
  • AD1024-24F
    24VDC, 1A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
    (ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 9 Watts at 75°C.)
  • AD1240-48S
    48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C 
    (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
  • AD1120-48F
    48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
    (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
d-ipes-0008-4.pdfLink para download
m-ipes-0008-4.pdfLink para download