+55 (11) 3488-8787
Loading
Clique e conheça a página da Softbrasil no Facebook Clique e conheça nosso perfil no Twitter Acesse nosso Canal no Youtube Faça parte de nossa Rede no Linkedin

IFR-0202-ST

IFR-0202-ST

Universal Redundant ST Fiber Controller

  • Redundant power inputs: 12~48VDC
  • Wall mount and DIN rail design
  • IP-30 Protection
  • Plug-and-play deployment


    OVERVIEW

    The Lantech IFR-0202 provides a permanent and trouble-free access port for in-line network devices. The 4x4 Optical Bypass Switch automatically switches network traffic through added in-line devices or bypasses devices that are about to be removed. Prevent link failure when attached in-line devices lose power by powering the IFR-0202 and in-line device from the same power source.

    The Lantech IFR-0202 supports bypass function with fiber in-line device when it shares the same power source as the in-line device. While the IFR-0202 is receiving power, it diverts network traffic to attached in-line devices. In this state, all in-line traffic is routed directly to the device connected to the IFR-0202.

    When the Optical Fiber Controller loses power, in-line traffic continues to flow through the network link, but is no longer routed through the device. This allows the network devices to be removed and replaced without network downtime. Once power is restored to the IFR-0202, network traffic is seamlessly diverted to the in-line device, allowing it to resume its critical functions.



Certificados

 Bypass function with fiber in-line device at speeds of 100 Mbps or 1000 Mbps

 Increased reliability on critical network links

 High-speed optical switching (<5ms) with minimal insertion loss (Max 1 6dB as Bypass Mode)

 Fully RoHS compliant

 IP 30 protection with DIN rail and wall mount design

 LED indicator shows power status

 Tested and compatible with all major manufacturers’ in-line devices

 30 Seconds Boot Up Delay Design

Hardware Specification

Connector

ST Fiber Connectors

Optical Cable

Fiber Type: Multimode Corning 62.5/125μm, wavelength, 850nm
Insertion Loss: Max 1.6dB when the switch losing power and is in Bypass mode
Fiber Type: Singlemode Corning 9/125μm, wavelength, 1300~1550nm
Insertion Loss: Max 1.6dB when the switch losing power and is in Bypass mode

Boot Up Delay

Every time the power has been connected, it'll take about 30 seconds delay then boot up.

Operation Wavelength

1280-1340/ 1520-1625 nm

Insertion Loss (dB) 1310/ 1550 nm

TX1→A0

0.62

0.51

RX1→A1

0.55

0.43

TX2→B0

0.35

0.35

RX2→B1

0.81

0.66

TX1→RX2

0.91

0.89

RX1→TX2

0.99

0.86

Repeatability (peak to peak) 100 Cycles 1550 nm

ALL CH

Pass ≤ 0.1

Return Loss (dB) 1310/ 1550 nm

TX1→A0

50

53

RX1→A1

52

53

TX2→B0

52

53

RX2→B1

50

54

TX1→RX2

49

51

RX1→TX2

54

52

PDL (dB) 1550 nm

ALL CH

Pass ≤ 0.1

WDL (dB) 1310/ 1550 nm

ALL CH

Pass ≤ 0.3

Switching Time (ms) 1550 nm

ALL CH

Pass ≤ 5

Cross Talk (dB) 1550 nm

ALL CH

Pass ≤ -80

LED

Power  (Green)

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

-20°C~60°C / -4°F~140°F

Storage Temperature

-40°C~85°C / -40°F~185°F

Power Supply

DC 12~48V, Redundant power and removable terminal block

Case

Metal case. IP-30 Protection

Dimension

30 (W) x 95 (D) x 140 (H) mm

Weight

440 g

Installation

DIN Rail and Wall Mount Design

Warranty

1 year


  • IFR-0202-ST-MM…………....….…........P/N: 8800-147
    4x4 Industrial Optical Fiber Controller; ST connectors; 
    1.25Gbps/125Mbps Auto-Sensing; Multi mode

     
  • IFR-0202-ST-SM…………....….….........P/N: 8800-148
    4x4 Industrial Optical Fiber Controller; ST connectors; 
    1.25Gbps/125Mbps Auto-Sensing; Single mode

OPTIONAL ACCESSORIES

DIN Rail Power

  • AD1048-24FS
    24VDC, 2A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
    (ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 18 Watts at 75°C.)
  • AD1024-24F
    24VDC, 1A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
    (ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 9 Watts at 75°C.)
  • AD1240-48S
    48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C 
    (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
  • AD1120-48F
    48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
    (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
d-ifr-0202(2).pdfLink para download
m-ifr-0202(2).pdfLink para download