+55 (11) 3488-8787
Loading
Clique e conheça a página da Softbrasil no Facebook Clique e conheça nosso perfil no Twitter Acesse nosso Canal no Youtube Faça parte de nossa Rede no Linkedin

IDS-2204

IDS-2204

4 RS-232/422/485 port to 2 10/100TX
Ethernet Device Server

  • Redundant Dual Ethernet Ports: Recovery time < 10ms
  • Switch Mode Supported
  • NAT-pass through
  • Secured Management by HTTPS and SSH


    OVERVIEW

    Lantech IDS-2204 is a 4-port RS232/422/485 to 2-port LAN redundant device server. To assure the agility and security of critical data, IDS-2204 offers many powerful features for HW & SW redundant functions.

    When the connection between master-link and LAN fails, IDS-2204 can automatically switch to another LAN port within 10ms, and still guarantees a non-stop connection. IDS-2204 also supports switch mode, users can use Daisy Chain to reduce the usage of Ethernet switch ports.  To assure all critical data that saved in different host PC to avoid Ethernet break or host PCs failure, IDS-2204 is able to transfer data into 5 host PCs simultaneously. The NAT pass through function allows users to manage IDS-2204 inside or outside the NAT router. It is easy for different IP domain users to use IDS-2204.

    IDS-2204 also provides dual redundant power inputs on DC power jack and terminal block. IDS-2204 is one of the best communication redundant solutions for application of serial devices.



Certificados

 Dual redundant Ethernet port support redundant mode (Recovery time < 10ms)

 Ethernet switch mode enable Daisy Chain

 Redundant 5 multiple host devices supported to protect your industrial network

 Versatile modes & event alarm by e-mail

 HTTPs & SSH protocol supported for secured management

 NAT router pass through

 IP table to prevent access from unauthorized IP address

 Configurable by Web-based and Windows utility (DS-Tool)

 Dual redundant DC power inputs of terminal block

 Rigid IP-30 housing design

 DIN-Rail and panel mounting enabled


LAN

2 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX

Feature

Present at ETH2
Power consumption: 8Watts max.
Over load & short circuit protection
Isolation Voltage: 1000 VDC min.
Isolation Resistance : 108 ohms min

Serial Connector

DB9 x 4

Serial Baud Rate

110 bps to 460.8 Kbps

Serial Data Bits

5, 6, 7, 8

Serial Parity

odd, even, none, mark, space

Serial Stop Bits

1, 1.5, 2

RS-232

TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND

RS-422

Tx+,Tx-, Rx+, Rx-,GND

RS-485 (4-wire)

Tx+,Tx-, Rx+, Rx-,GND

RS-485 (2-wire)

Data+, Data-,GND

Flow Control

XON/XOFF, RTS/CTS, DTR/DSR

LED

Power indicator
PWR 1(2) / Ready:
Red On: Power is on and booting up.
Red Blinking: Indicates an IP conflict, or DHCP or BOOTP server did not respond properly.
Green On: Power is on and functioning normally.
Green Blinking: Located by Administrator.
10/100TX RJ45 port
Green for port Link/Act at 100Mbps. 
Amber for port Link/Act at 10Mbps.
Serial TX / RX LEDs
Red: Serial port is receiving data 
Green: Serial port is transmitting data

Power Supply

Dual DC inputs. 12-48VDC on 6-pin terminal block

Power Consumption

5.5 Watts

Overload current protection

Present

Reverse polarity protection

Present on terminal block

EMI & EMS

FCC Part 15, CISPR (EN55022) class A
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11

Shock

IEC60068-2-27

Free Fall

IEC60068-2-32

Vibration

IEC60068-2-6

Serial operation mode

RS232 / RS422 / 4(2)-Wire RS485.
Which can be configured by DS-Tool

Safety

EN60950

Operation Humidity

5% to 95% Non-condensing

Operation Temperature

-20 to 60oC (14 to 140oF)

Storage Temperature

-40 to 85oC (-40 to 185oF)

Case

IP30,
52 (W) x 106.1 (D ) x144.3 (H) mm
(2.05x4.18x5.68 inch.)

Weight

682 g

Warranty

1 year


  • IDS-2204…………………………P/N: 8425-020
    4 RS-232/422/485 port to 2 10/100TX Ethernet Device Server

 

OPTIONAL ACCESSORIES

DIN Rail Power

  • AD1048-24FS
    24VDC, 2A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
    (ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 18 Watts at 75°C.)
  • AD1024-24F
    24VDC, 1A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
    (ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 9 Watts at 75°C.)
  • AD1240-48S
    48VDC, 5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C 
    (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
  • AD1120-48F
    48VDC, 2.5A, Wide AC Input, Build-in fan Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
    (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
d-ids-2204.pdfLink para download
m-ids-2204l.pdfLink para download
ids-2204_v103.binLink para download